From: Tim Fletcher (tim@fletchmail.net)
Date: Wed Oct 09 2002 - 13:38:46 GMT-3
I've had similar problems which I solved by changing the client to
transparent mode, then back to client mode. Make sure you exit vlan
database config mode between each change so they get saved. I think the
problem is that the vlan database revisions get out of sync.
-Tim
On Wed, 9 Oct 2002, chenyan wrote:
> hi,guys
>
> one 3550 connecting two 2950, all the vtp and vlan information are configured, and the 3550 and one 2950 work fine that all the vlans created on the 3550 are transfered to the 2950, but the other 2950 does not get the vlan information, why? the connection between the 3550 and the 2950 are trunked aith dot1q encapulation.
>
> Thanks
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:43 GMT-3