From: Ivan Centeno (icenteno2001@yahoo.com)
Date: Tue Oct 08 2002 - 16:09:02 GMT-3
Dong,
It is my understanding that the split horizon reported
in the show interface command is the rip split horizon
not the eigrp. I am not sure what command show these.
Best Regards
Ivan
--- "D. Lee" <dongweylee1@attbi.com> wrote:
> R1 is the Hub of Frame-Relay network, and R2, R3 are
> the spoke routers.
> They all use physical interfaces connect to each
> other, and have EIGRP running
> in between.
>
> I use "sho ip interface serial x" command to check
> if split horizon is enabled
> or disabled for any particular interface.
>
> If one of them said enabled and I have to disable it
> (for some reason), then I
> enter "no ip split-horizon eigrp ##" under that
> interface. I do "sho ip
> interface serial x", and it still said enabled and
> nothing changed.
>
> If one of them said disabled and I have to enable it
> (for some reason), then I
> enter "ip split-horizon eigrp ##" under that
> interface. I do "sho ip interface
> serial x", and it still said disabled and nothing
> changed.
>
> Is it supposed to work this way?? How do I know if
> something is really
> enabled/disabled?? Did I use the wrong command??
>
> Thanks for any feedback.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3