From: D. Lee (dongweylee1@attbi.com)
Date: Tue Oct 08 2002 - 15:41:44 GMT-3
R1 is the Hub of Frame-Relay network, and R2, R3 are the spoke routers.
They all use physical interfaces connect to each other, and have EIGRP running
in between.
I use "sho ip interface serial x" command to check if split horizon is enabled
or disabled for any particular interface.
If one of them said enabled and I have to disable it (for some reason), then I
enter "no ip split-horizon eigrp ##" under that interface. I do "sho ip
interface serial x", and it still said enabled and nothing changed.
If one of them said disabled and I have to enable it (for some reason), then I
enter "ip split-horizon eigrp ##" under that interface. I do "sho ip interface
serial x", and it still said disabled and nothing changed.
Is it supposed to work this way?? How do I know if something is really
enabled/disabled?? Did I use the wrong command??
Thanks for any feedback.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3