From: Phil (ciscostudent1@yahoo.com.br)
Date: Tue Oct 08 2002 - 07:16:39 GMT-3
Actually you don't have to copy run start after you change the config register. It will be set to the value you configured either if you save or not the configuration.
Phil
mdye@bevillcntr.org wrote:And don't forget "copy run start".
At 11:03 PM 10/7/02 -0700, Leo Seto wrote:
>Lawyers? Charge those guys $300/hr. : )
>
>do what while running? change the config register?
>
>config t
>config-register 0xXXXX
>
>
>
>
>On Mon, 7 Oct 2002, George E Lampro Super Genius wrote:
>
>> Guys,
>> Thanks for the quick response on this.
>>
>>
>> I think the resister is 0x2142 I can force the image to load by typing
i to
>> initialize
>> but it doesn't default to the startup config.
>>
>> I'll try the 0x2101
>>
>> anyone know how to do this while the router is running. It supports our
>> internet connection for 700+ lawyers adn staff.
>>
>>
>> GL
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> Jay Hennigan
>> Sent: Monday, October 07, 2002 10:58 PM
>> To: George E Lampro Super Genius
>> Cc: 'ccielab'
>> Subject: Re: password recovery problem
>>
>>
>> On Mon, 7 Oct 2002, George E Lampro Super Genius wrote:
>>
>> > password recovery problem
>> >
>> >
>> > Okay friends,
>> >
>> > I've performed password recovery on a 2621 router and it continues to
boot
>> > in to Rom monitor mode.
>> >
>> > Does anyone know what config register command will correct this??
>>
>> 0x2102 should do the trick, if the IOS image is valid. Watch the startup
>> messages, you might have other problems.
>>
>> --
>> Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
>> NetLojix Communications, Inc. - http://www.netlojix.com/
>> WestNet: Connecting you to the planet. 805 884-6323
---------------------------------
Yahoo! GeoCities
Tudo para criar o seu site: ferramentas faceis de usar, espago de sobra e acesssrios.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3