From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Tue Oct 08 2002 - 00:33:06 GMT-3
not sure,
but try to configure bridge irb on rtr6 as well, and configure the appropriate no bridge 1 route
ipx, bridge1 bridge ipx command and see where that lend you.
let us know.
Donny
ying c
<bf5tgh1@yahoo.co To: ccielab@groupstudy.com
m> cc:
Sent by: Subject: Help! ipx irb over serial link
nobody@groupstudy
.com
08-10-2002 08:28
Please respond to
ying c
Hi,
I thought I had this worked a while back, but I'm no
longer sure as I'm completely blind now. Below is the
topology and the configs.
Thanks,
Chang
Topology
R8---serial bg2-R6---ether bg2----r9--bvi2
R8: just a router simulate an end station
R6: bridge, no ipx routing
R9: irb
Goal: ping from R8's s1/0 to R9's BVI
=============================================
Router configs
R8 - end station:
ipx routing 0008.0008.0008
!
interface Serial1/0
ipx network 800
!
!
R6 - bridge:
!
interface Ethernet0
bridge-group 2
!
interface Serial0
bridge-group 2
!
R9 - irb router:
ipx routing 00e0.1ea9.bf64
!
bridge irb
!
interface Ethernet0
bridge-group 2
!
interface BVI2
ipx network 800
!
!
bridge 2 route ipx
---------------------------
Output:
R8:
r8#sh ipx int s1/0
Serial1/0 is up, line protocol is up
IPX address is 800.0008.0008.0008 [up]
============================
R6:
r6#sh span
Bridge group 2 is executing the IEEE compatible
Spanning Tree protocol
Bridge Identifier has priority 32768, address
0000.0c07.ac01
Configured hello time 2, max age 20, forward delay
15
We are the root of the spanning tree
Port Number size is 9
Topology change flag not set, detected flag not set
Times: hold 1, topology change 35, notification 2
hello 2, max age 20, forward delay 15
Timers: hello 0, topology change 0, notification 0
bridge aging time 300
Port 2 (Ethernet0) of Bridge group 2 is forwarding
Port path cost 100, Port priority 128
Designated root has priority 32768, address
0000.0c07.ac01
Designated bridge has priority 32768, address
0000.0c07.ac01
Designated port is 2, path cost 0
Timers: message age 0, forward delay 0, hold 0
BPDU: sent 1464, received 1
Port 6 (Serial0) of Bridge group 2 is forwarding
Port path cost 647, Port priority 128
Designated root has priority 32768, address
0000.0c07.ac01
Designated bridge has priority 32768, address
0000.0c07.ac01
Designated port is 6, path cost 0
Timers: message age 0, forward delay 0, hold 0
BPDU: sent 1466, received 2
r6#sh ipx int brief
%IPX not running
r6#sh bridge
Total of 300 station blocks, 297 free
Codes: P - permanent, S - self
Bridge Group 2:
Address Action Interface Age RX
count TX count
0000.0c38.888e forward Ethernet0 0
214 0
0060.2f19.b439 forward Ethernet0 0
150 0
r6#
==================================================
r9#sh bridge
Total of 300 station blocks, 297 free
Codes: P - permanent, S - self
Bridge Group 2:
Address Action Interface Age RX
count TX count
0000.0c38.888e forward Ethernet0 5
239 0
0000.0c07.ac01 forward Ethernet0 5
99 0
r9#ping 800.8.8.8
Type escape sequence to abort.
Sending 5, 100-byte IPX Novell Echoes to
800.0008.0008.0008, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
r9#
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3