From: Paglia, John (USPC.PCT.Hopewell) (JPaglia@NA2.US.ML.com)
Date: Mon Oct 07 2002 - 20:20:13 GMT-3
You won't get debugs if there is an encapsulation mismatch as well. I never
tried the cdp method stated below, but if you're going to do it via debugs,
you should make separate subints each w/ a different network # and
encap......the one with the right encap will return debugs, and the mystery
will be solved.
John
> -----Original Message-----
> From: Justin Cook [SMTP:Justin.Cook@computerland.co.nz]
> Sent: Monday, October 07, 2002 5:17 PM
> To: 'esther'; ccielab@groupstudy.com
> Subject: RE: how to detect hidden ipx number
>
> Wouldn't cdp give you this information as well?
>
>
> Did a test a managed to get the ipx network number of the directly
> attached
> device
>
> Warrented there are a few blocks but it seems to work ok
>
> --
> Justin Cook
>
>
> -----Original Message-----
> From: esther [mailto:esther1616@hanmail.net]
> Sent: Saturday, 5 October 2002 8:44 p.m.
> To: ccielab@groupstudy.com
> Subject: how to detect hidden ipx number
>
> Hi all,
>
> To detect a hidden ipx number, I did the following step.
>
> R1 --- (ipx ?)----- (Ethernet) -----(ipx 200) -- R2
>
> R1#
> R1#debug ipx packet
> IPX packet debugging is on
> R1#
> R1#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R1(config)#int e0
> R1(config-if)#ipx network 10 .... assigned a discretionary ipx no. 10
> R1(config-if)#
> R1(config-if)#
>
> No debugging messages are appeared, I expected mismatch ipx network
> number.
> Anyone help me how to detect the hidden ipx network number?
>
> Thanks in advance,
>
> Esther.
> [TABLE NOT SHOWN]
>
> [TABLE NOT SHOWN][TABLE NOT SHOWN][IMAGE]
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:41 GMT-3