From: ying c (bf5tgh1@yahoo.com)
Date: Mon Oct 07 2002 - 13:48:46 GMT-3
Here's the link you are looking for I think:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt4/qcfpolsh.htm
--- Chris Hugo <chrishugo@yahoo.com> wrote:
> Here is a good article. Basic but helpful.
>
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtml
>
> Nick, when you find that article please pass to
> group. I also searched but had no luck finding the
> article you speak of . Thanks...
> chris hugo
> Ayman Hamza wrote: Thanks, and I hope I can receive
> these URLs from you
>
>
> -Ayman
>
> > From nobody@groupstudy.com Mon Oct 7 12:50:20 2002
> > From: "Nick Shah"
> > To: "Ayman Hamza" , ,
> > ,
> > Subject: Re: car problem
> > Date: Mon, 7 Oct 2002 20:26:05 +1000
> > MIME-Version: 1.0
> > Content-Transfer-Encoding: 7bit
> > X-Mailer: Microsoft Outlook Express 5.00.2615.200
> > X-ASK-Info: Whitelist match
> > Sender: nobody@groupstudy.com
> > Reply-To: "Nick Shah"
> >
> > Ayman
> >
> > I will have to re-find the url for you. but for
> now..
> >
> > normal burst = 0.1875 x avg. rate
> > excess burst = normal burst x 2
> >
> > These are somewhere on CCO, more so I have checked
> with ttcp and found them
> > to be reliable to police at appropriate configured
> rate.
> >
> > Nick
> > ----- Original Message -----
> > From: Ayman Hamza
> > To: ; ;
> >
> > Sent: Monday, October 07, 2002 7:35 PM
> > Subject: Re: car problem
> >
> >
> > > Hi;
> > >
> > > I want to ask if there are default CAR
> parameters for the average-rate,
> > > nomral-bursts, max-burst keywords in the
> rate-limit command If the
> > > question did't determine what are these
> parameters. The reason I'm
> > > asking is all the replies contain these values
> as if these are
> > > the defaults although the Command reference
> doesn't say these are the
> > defaults.
> > >
> > > Can any one shed a light on this? What are
> default parameters for these
> > values,
> > > and if there are any default parameters in case
> of Voice traffic when it's
> > > transmitted over frame-relay?
> > >
> > > Regards;
> > > Ayman
> > >
> > >
> > >
> > >
> > > > From nobody@groupstudy.com Fri Oct 4 17:01:41
> 2002
> > > > Subject: Re: car problem
> > > > To: ccielab@groupstudy.com
> > > > From: "Donny MATEO"
> > > > Date: Fri, 4 Oct 2002 22:49:21 +0800
> > > > MIME-Version: 1.0
> > > > X-ASK-Info: Whitelist match
> > > > Sender: nobody@groupstudy.com
> > > > Reply-To: "Donny MATEO"
> > > >
> > > > Found it in tac
> > > >
> > > > access-list 100 permit udp any any range 16384
> 32767
> > > > access-list 100 permit tcp any any eq 1720
> > > > !
> > > > interface ethernet 0/0
> > > > ip address 10.10.10.1 255.255.255.0
> > > > rate-limit 10.10.10.1 255.255.255.0
> > > > rate-limit input
> > > > access-group 100 100000 8000 8000
> conform-action set-prec-continue 5
> > exceed-action
> > > > set-prec-continue 5
> > > >
> > > >
> > > >
> >
>
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/qossol/qosvoip.htm
> > #xtocid4
> > > >
> > > > Best Regards
> > > > Donny
> > > > ----- Forwarded by Donny
> MATEO/ADPC/ASIA/BANQUE_INDOSUEZ/FR on
> > 04-10-2002 22:44 -----
> > > >
> > > > Donny MATEO
> > > > To: "chenyan"
> >
> > > > 04-10-2002 22:40 cc: "ccielab"
> >
> > > > Subject: Re: car
> > problem(Document link: Donny MATEO)
> > > >
> > > >
> > > >
> > > >
> > > > not sure about the access-list,
> > > >
> > > > but for the car should be when you define the
> conform action
> > > > rate-limit input access-group 1 8000 1000
> 16000 conform-action
> > set-prec-transmit
> > > >
> > > > Best Regards
> > > > Donny
> > > >
> > > >
> > > >
> > > > "chenyan"
> > > > >
> > > > com.cn> cc:
> > > > Sent by: Subject: car problem
> > > > nobody@groupstudy
> >
> > > > .com
> > > >
> > > >
> > > > 04-10-2002 21:42
> > > > Please respond to
> > > > "chenyan"
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > hi,guys
> > > >
> > > > I got a bootcamp 8 car problem:
> > > > "Configure CAR on router R13 so all outing
> voice traffic should have ip
> > precedenece set to Critical.
> > > > All other traffic should have it's precedence
> set to 0."
> > > > I also want to how to configure the CAR and
> the voice access-list.
> > > >
> > > > Thanks
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > This message is for information purposes only
> and its content
> > > > should not be construed as an offer, or
> solicitation of an offer,
> > > > to buy or sell any banking or financial
> instruments or services
> > > > and no representation or warranty is given in
> respect of its
> > > > accuracy, completeness or fairness. The
> material is subject
> > > > to change without notice. You should take your
> own independent
> > > > tax, legal and other professional advice in
> respect of the content
> > > > of this message. This message may contain
> confidential or
> > > > legally privileged material and may not be
> copied, redistributed
> > > > or published (in whole or in part) without our
> prior written consent.
> > > > This email may have been intercepted,
> partially destroyed,
> > > > arrive late, incomplete or contain viruses and
> no liability is
> > > > accepted by any member of the Credit Agricole
> Indosuez group
> > > > as a result. If you are not the intended
> recipient of this message,
>
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:41 GMT-3