RE: 3550 security port and SPAN

From: Teknoloji Çözümleri (Ümit)
Date: Mon Oct 07 2002 - 09:23:17 GMT-3

• Next message: Albert Lu: "OT: Resources for Writing Proposals"
• Previous message: Ayman Hamza: "Re: car problem"
• Maybe in reply to: Jun Qian: "3550 security port and SPAN"
• Next in thread: ying c: "Re: 3550 security port and SPAN"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

(config)#monitor session ......
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1218ea1/3550cr
/cli1.htm#xtocid70

(config-if)#switchport port-security mac-address 3333.4444.5555
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1218ea1/3550cr
/cli2.htm#xtocid95

hth
umit

-----Original Message-----
From: Jun Qian [mailto:johnjunqian@yahoo.com]
Sent: Monday, October 07, 2002 07:51
To: ccielab@groupstudy.com
Subject: 3550 security port and SPAN

Hi,guys,

I got some questions about 3550.

I know that cat 5500 support SPAN. For example.CCIE
Practical Stufies Volume1 Page 1149.
"configure the switchc so that all VLan 2 traffic can
be monitored with a sniffer/anaylzer on port 2/10".
On cat5500, we can issue "set span ...";
But, I cannot some command to do on 3550!
Another, what command replace "set port security 2/5
3333.4444.5555" on 3550?

Do you have advice? Thanks!

John

• Next message: Albert Lu: "OT: Resources for Writing Proposals"
• Previous message: Ayman Hamza: "Re: car problem"
• Maybe in reply to: Jun Qian: "3550 security port and SPAN"
• Next in thread: ying c: "Re: 3550 security port and SPAN"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:41 GMT-3