From: Ayman Hamza (ayhamza@cisco.com)
Date: Mon Oct 07 2002 - 06:35:27 GMT-3
Hi;
I want to ask if there are default CAR parameters for the average-rate,
nomral-bursts, max-burst keywords in the rate-limit command If the
question did't determine what are these parameters. The reason I'm
asking is all the replies contain these values as if these are
the defaults although the Command reference doesn't say these are the defaults.
Can any one shed a light on this? What are default parameters for these values,
and if there are any default parameters in case of Voice traffic when it's
transmitted over frame-relay?
Regards;
Ayman
> From nobody@groupstudy.com Fri Oct 4 17:01:41 2002
> Subject: Re: car problem
> To: ccielab@groupstudy.com
> From: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
> Date: Fri, 4 Oct 2002 22:49:21 +0800
> MIME-Version: 1.0
> X-ASK-Info: Whitelist match
> Sender: nobody@groupstudy.com
> Reply-To: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
>
> Found it in tac
>
> access-list 100 permit udp any any range 16384 32767
> access-list 100 permit tcp any any eq 1720
> !
> interface ethernet 0/0
> ip address 10.10.10.1 255.255.255.0
> rate-limit 10.10.10.1 255.255.255.0
> rate-limit input
> access-group 100 100000 8000 8000 conform-action set-prec-continue 5 exceed-action
> set-prec-continue 5
>
>
> http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/qossol/qosvoip.htm#xtocid4
>
> Best Regards
> Donny
> ----- Forwarded by Donny MATEO/ADPC/ASIA/BANQUE_INDOSUEZ/FR on 04-10-2002 22:44 -----
>
> Donny MATEO
> To: "chenyan" <chenyan@deeptht.com.cn>
> 04-10-2002 22:40 cc: "ccielab" <ccielab@groupstudy.com>
> Subject: Re: car problem(Document link: Donny MATEO)
>
>
>
>
> not sure about the access-list,
>
> but for the car should be when you define the conform action
> rate-limit input access-group 1 8000 1000 16000 conform-action set-prec-transmit <new precedence>
>
> Best Regards
> Donny
>
>
>
> "chenyan"
> <chenyan@deeptht. To: "ccielab" <ccielab@groupstudy.com>
> com.cn> cc:
> Sent by: Subject: car problem
> nobody@groupstudy
> .com
>
>
> 04-10-2002 21:42
> Please respond to
> "chenyan"
>
>
>
>
>
>
> hi,guys
>
> I got a bootcamp 8 car problem:
> "Configure CAR on router R13 so all outing voice traffic should have ip precedenece set to Critical.
> All other traffic should have it's precedence set to 0."
> I also want to how to configure the CAR and the voice access-list.
>
> Thanks
>
>
>
>
>
>
> This message is for information purposes only and its content
> should not be construed as an offer, or solicitation of an offer,
> to buy or sell any banking or financial instruments or services
> and no representation or warranty is given in respect of its
> accuracy, completeness or fairness. The material is subject
> to change without notice. You should take your own independent
> tax, legal and other professional advice in respect of the content
> of this message. This message may contain confidential or
> legally privileged material and may not be copied, redistributed
> or published (in whole or in part) without our prior written consent.
> This email may have been intercepted, partially destroyed,
> arrive late, incomplete or contain viruses and no liability is
> accepted by any member of the Credit Agricole Indosuez group
> as a result. If you are not the intended recipient of this message,
> please immediately notify the sender and delete this message
> from your computer.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:41 GMT-3