From: Nick Shah (nshah@connect.com.au)
Date: Mon Oct 07 2002 - 07:26:05 GMT-3
Ayman
I will have to re-find the url for you. but for now..
normal burst = 0.1875 x avg. rate
excess burst = normal burst x 2
These are somewhere on CCO, more so I have checked with ttcp and found them
to be reliable to police at appropriate configured rate.
Nick
----- Original Message -----
From: Ayman Hamza <ayhamza@cisco.com>
To: <ccielab@groupstudy.com>; <donny.mateo@sg.ca-indosuez.com>;
<umit.askan@probil.com.tr>
Sent: Monday, October 07, 2002 7:35 PM
Subject: Re: car problem
> Hi;
>
> I want to ask if there are default CAR parameters for the average-rate,
> nomral-bursts, max-burst keywords in the rate-limit command If the
> question did't determine what are these parameters. The reason I'm
> asking is all the replies contain these values as if these are
> the defaults although the Command reference doesn't say these are the
defaults.
>
> Can any one shed a light on this? What are default parameters for these
values,
> and if there are any default parameters in case of Voice traffic when it's
> transmitted over frame-relay?
>
> Regards;
> Ayman
>
>
>
>
> > From nobody@groupstudy.com Fri Oct 4 17:01:41 2002
> > Subject: Re: car problem
> > To: ccielab@groupstudy.com
> > From: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
> > Date: Fri, 4 Oct 2002 22:49:21 +0800
> > MIME-Version: 1.0
> > X-ASK-Info: Whitelist match
> > Sender: nobody@groupstudy.com
> > Reply-To: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
> >
> > Found it in tac
> >
> > access-list 100 permit udp any any range 16384 32767
> > access-list 100 permit tcp any any eq 1720
> > !
> > interface ethernet 0/0
> > ip address 10.10.10.1 255.255.255.0
> > rate-limit 10.10.10.1 255.255.255.0
> > rate-limit input
> > access-group 100 100000 8000 8000 conform-action set-prec-continue 5
exceed-action
> > set-prec-continue 5
> >
> >
> >
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/qossol/qosvoip.htm
#xtocid4
> >
> > Best Regards
> > Donny
> > ----- Forwarded by Donny MATEO/ADPC/ASIA/BANQUE_INDOSUEZ/FR on
04-10-2002 22:44 -----
> >
> > Donny MATEO
> > To: "chenyan"
<chenyan@deeptht.com.cn>
> > 04-10-2002 22:40 cc: "ccielab"
<ccielab@groupstudy.com>
> > Subject: Re: car
problem(Document link: Donny MATEO)
> >
> >
> >
> >
> > not sure about the access-list,
> >
> > but for the car should be when you define the conform action
> > rate-limit input access-group 1 8000 1000 16000 conform-action
set-prec-transmit <new precedence>
> >
> > Best Regards
> > Donny
> >
> >
> >
> > "chenyan"
> > <chenyan@deeptht. To: "ccielab"
<ccielab@groupstudy.com>
> > com.cn> cc:
> > Sent by: Subject: car problem
> > nobody@groupstudy
> > .com
> >
> >
> > 04-10-2002 21:42
> > Please respond to
> > "chenyan"
> >
> >
> >
> >
> >
> >
> > hi,guys
> >
> > I got a bootcamp 8 car problem:
> > "Configure CAR on router R13 so all outing voice traffic should have ip
precedenece set to Critical.
> > All other traffic should have it's precedence set to 0."
> > I also want to how to configure the CAR and the voice access-list.
> >
> > Thanks
> >
> >
> >
> >
> >
> >
> > This message is for information purposes only and its content
> > should not be construed as an offer, or solicitation of an offer,
> > to buy or sell any banking or financial instruments or services
> > and no representation or warranty is given in respect of its
> > accuracy, completeness or fairness. The material is subject
> > to change without notice. You should take your own independent
> > tax, legal and other professional advice in respect of the content
> > of this message. This message may contain confidential or
> > legally privileged material and may not be copied, redistributed
> > or published (in whole or in part) without our prior written consent.
> > This email may have been intercepted, partially destroyed,
> > arrive late, incomplete or contain viruses and no liability is
> > accepted by any member of the Credit Agricole Indosuez group
> > as a result. If you are not the intended recipient of this message,
> > please immediately notify the sender and delete this message
> > from your computer.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:41 GMT-3