From: Chris Young (csyoung@speakeasy.net)
Date: Sat Oct 05 2002 - 00:47:32 GMT-3
Joe,
If I remember correctly you can do back to back on the IMA modules.
What you cannot do is regular T1 framing.
HTH,
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joseph Rinehart
Sent: Friday, October 04, 2002 11:15 PM
To: ccielab@groupstudy.com
Subject: ATM IMA/T1 Crossover
I always seem to come up with the weird questions. I work for a telecom
provider and recently we got in two 2620's that were over-ordered for a
customer and can't be returned. I have gotten permission to use them
for some
testing purposes, and they have 4 port T1 IMA cards in them. Since I
have had
zero availability to do ATM configuration, I would assume that you could
use
T1 crossover cables to hook them up back to back and simulate an ATM
connection.
Am I right on this or, like ISDN BRI, are you restricted to being
directly
connected to a switch? This sounds like it should work but wanted some
other
guidance in working it out.
Joe
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:39 GMT-3