From: Copleston Daniel (Daniel.Copleston@ukomfs.com)
Date: Fri Oct 04 2002 - 09:58:23 GMT-3
Further to my earlier post, page 25 and on in the following have some info
on this:
http://www.cisco.com/networkers/nw01/pres/preso/RoutingandSwitchingTechnolog
ies/RST-309.pdf
Daniel
-----Original Message-----
From: Jaksec, Nick [mailto:Nick.Jaksec@acs-inc.com]
Sent: 04 October 2002 13:35
To: CCIE (E-mail)
Subject: EIGRP Question
Is there any need to have multiple EIGRP AS's within a rather large network?
I can see with OSPF by creating multiple areas and then summarizing at the
ABR, but with EIGRP you can summarize anywhere thus creating the same
effect. What is the advantage to having multiple EIGRP AS's and
redistributing between them within a network ?? Any response would be
appreciated, thanks !!
************************************************************************
The contents of this message and any attachments are confidential and
are intended solely for the attention and use of the addressee only.
Information contained in this message may be subject to legal,
professional or other privilege or may otherwise be protected by other
legal rules. This message should not be copied or forwarded to any other
person without the express permission of the sender. If you are not the
intended recipient you are not authorised to disclose, copy, distribute
or retain this message or any part of it.
If you have received this message in error, please notify the sender by
telephone (+44-20-7002-4000) and destroy the original message.
We reserve the right to monitor all e-mail messages passing through our
network.
************************************************************************
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:38 GMT-3