Re: ISDN DIAL

From: Blanco Lam (b@gclamb.com)
Date: Thu Oct 03 2002 - 09:06:45 GMT-3

• Next message: Howard C. Berkowitz: "Re: OSPF Design"
• Previous message: Donny MATEO: "Re: rip network problem"
• Maybe in reply to: Adam Crisp: "ISDN DIAL"
• Next in thread: Larson, Chris: "RE: ISDN DIAL"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Adam,

What do "debug ppp neg" and "debug ip packet" show?

Blanco

---- Original message ----
>Date: Thu, 3 Oct 2002 12:28:48 +0100
>From: "Adam Crisp" <adam.crisp@totalise.co.uk>
>Subject: ISDN DIAL
>To: "Ccielab" <ccielab@groupstudy.com>
>
>Hi,
>
>Can anybody spot why these routers won't dial eachother.
>(they dial ok, but connection is rejected at L3 by remote router)
>
>Switch type is Basic-net3, so no need for SPID's
>
>Adam
>
>
>!Router1
>!
>isdn switch-type basic-net3
>!
>int Bri0/0
>bandwidth 64
>ip address 192.168.200.1 255.255.255.252
>encapsulation ppp
>dialer map ip 192.168.200.2 222 broadcast
>dialer-group 1
>isdn switch-type basic-net3
>dialer idle-timeout 30
>!
>dialer-list 1 protocol ip permit
>end
>!
>!Router2
>!
>isdn switch-type basic-net3
>!
>int Bri0/0
>bandwidth 64
>ip address 192.168.200.2 255.255.255.252
>encapsulation ppp
>dialer map ip 192.168.200.1 111 broadcast
>dialer-group 1
>isdn switch-type basic-net3
>dialer idle-timeout 30
>!
>dialer-list 1 protocol ip permit
>!
>end

• Next message: Howard C. Berkowitz: "Re: OSPF Design"
• Previous message: Donny MATEO: "Re: rip network problem"
• Maybe in reply to: Adam Crisp: "ISDN DIAL"
• Next in thread: Larson, Chris: "RE: ISDN DIAL"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:37 GMT-3