From: Ayman Hamza (ayhamza@cisco.com)
Date: Tue Oct 01 2002 - 18:43:03 GMT-3
Hi Beda;
I hope that this is not a question from one of CCIE current exams, as the
wording you used are a littel bit tricky. CAT 3550 is handling by
default IGMP leave and joining messages sent by Multicast hosts.
But is you want to prune faster the hosts membership from 3550
Multicast cache you should use " Immediate-leave" feature for that VLAN:
switch(config)#ip ignmp snooping vlan <vlan-id> immediate-leave
What is the precise wording of the question??
Regards;
Ayman
> From nobody@groupstudy.com Tue Oct 1 23:09:25 2002
> Date: Tue, 1 Oct 2002 16:56:42 -0400
> To: "beda jain" <bpjain@cisco.com>, "groupstudy "
> <ccielab@groupstudy.com>
> From: John Neiberger <neiby@ureach.com>
> Subject: Re: igmp leave message in 3550
> Mime-Version: 1.0
> Content-Transfer-Encoding: 7bit
> X-vsuite-type: e
> X-ASK-Info: Whitelist match
> Sender: nobody@groupstudy.com
> Reply-To: John Neiberger <neiby@ureach.com>
>
> A search on CCO turned up the following link:
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12111e
> a1/3550scg/swigmp.htm#32199
>
> Watch the line wrap! Is that the feature you're referring to?
>
> John
>
>
>
> ---- On Tue, 01 Oct 2002, beda jain (bpjain@cisco.com) wrote:
>
> > Hi Balaji,
> >
> > How i will configure igmp leave enble in 3550 and cat5
> >
> > thank,
> > beda
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:36 GMT-3