From: beda jain (bpjain@cisco.com)
Date: Tue Oct 01 2002 - 18:53:54 GMT-3
Hi,
I want to know the equivalent cmd in 3550 for set cgmp enable and set cgmp
leave enable.
thanks,
Beda
At 11:43 PM 10/1/2002 +0200, Ayman Hamza wrote:
>Hi Beda;
>
>I hope that this is not a question from one of CCIE current exams, as the
>wording you used are a littel bit tricky. CAT 3550 is handling by
>default IGMP leave and joining messages sent by Multicast hosts.
>
>But is you want to prune faster the hosts membership from 3550
>Multicast cache you should use " Immediate-leave" feature for that VLAN:
>
>switch(config)#ip ignmp snooping vlan <vlan-id> immediate-leave
>
>
>What is the precise wording of the question??
>
>Regards;
>Ayman
>
>
> > From nobody@groupstudy.com Tue Oct 1 23:09:25 2002
> > Date: Tue, 1 Oct 2002 16:56:42 -0400
> > To: "beda jain" <bpjain@cisco.com>, "groupstudy "
> > <ccielab@groupstudy.com>
> > From: John Neiberger <neiby@ureach.com>
> > Subject: Re: igmp leave message in 3550
> > Mime-Version: 1.0
> > Content-Transfer-Encoding: 7bit
> > X-vsuite-type: e
> > X-ASK-Info: Whitelist match
> > Sender: nobody@groupstudy.com
> > Reply-To: John Neiberger <neiby@ureach.com>
> >
> > A search on CCO turned up the following link:
> >
> > http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12111e
> > a1/3550scg/swigmp.htm#32199
> >
> > Watch the line wrap! Is that the feature you're referring to?
> >
> > John
> >
> >
> >
> > ---- On Tue, 01 Oct 2002, beda jain (bpjain@cisco.com) wrote:
> >
> > > Hi Balaji,
> > >
> > > How i will configure igmp leave enble in 3550 and cat5
> > >
> > > thank,
> > > beda
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:36 GMT-3