From: Rossow, Travis L (RossowTL@corning.com)
Date: Tue Oct 01 2002 - 12:20:28 GMT-3
I don't see a LMI type on your frame relay interfaces.
-----Original Message-----
From: Denise Donohue [mailto:fradendon@comcast.net]
Sent: Tuesday, October 01, 2002 11:06 AM
To: Frank Maisano; 'Steven Weber'; ccielab@groupstudy.com
Subject: Re: all pvc's on the frameswitch are inactive
If you didn't have the frame switch command, the router wouldn't let you put in the frame route statements.
My theory is that Cisco routers, when configured as frame switches, sometimes give up looking for a frame peer if the interfaces have been up for a long time and the connnected routers interfaces have also been up but not configured with frame encaps. Bounce the router and/or interfaces and that works, in my experience. (You've probably done that by now, anyway!)
Denise
----- Original Message -----
From: Frank Maisano
To: 'Steven Weber' ; ccielab@groupstudy.com
Sent: Tuesday, October 01, 2002 9:27 AM
Subject: RE: all pvc's on the frameswitch are inactive
Check to make sure you used the global config command: frame-relay switching
--FM
-----Original Message-----
From: Steven Weber [mailto:itweber@earthlink.net]
Sent: Monday, September 30, 2002 11:01 AM
To: ccielab@groupstudy.com
Subject: all pvc's on the frameswitch are inactive
All of my PVC's are inactive and I have no connectivity to my frame
switch or frame relay routers, I'm pasting my frame relay switch config
as well as the config to the frame relay routers. Any help is
appreciated
Steve
interface Serial0/0
ip address 150.50.246.4 255.255.255.224
ip broadcast-address 150.50.246.31
encapsulation frame-relay
ip ospf network point-to-multipoint
no fair-queue
clockrate 2000000
frame-relay map ip 150.50.246.6 146 broadcast
interface Serial1/0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ignore-hw local-loopback
clockrate 128000
cdp enable
frame-relay intf-type dce
frame-relay route 126 interface Serial1/2 162
!
interface Serial1/1
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ignore-hw local-loopback
cdp enable
frame-relay intf-type dce
frame-relay route 146 interface Serial1/2 164
!
interface Serial1/2
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ignore-hw local-loopback
clockrate 128000
cdp enable
frame-relay intf-type dce
frame-relay route 162 interface Serial1/0 126
frame-relay route 164 interface Serial1/1 146
frame-relay route 167 interface Serial1/3 176
!
interface Serial1/3
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ignore-hw local-loopback
clockrate 128000
cdp enable
frame-relay intf-type dce
frame-relay route 176 interface Serial1/2 167
!
Input Intf Input Dlci Output Intf Output Dlci Status
Serial1/0 126 Serial1/2 162 inactive
Serial1/1 146 Serial1/2 164 inactive
Serial1/2 162 Serial1/0 126 inactive
Serial1/2 164 Serial1/1 146 inactive
Serial1/2 167 Serial1/3 176 inactive
Serial1/3 176 Serial1/2 167 inactive
interface Serial0
no ip address
encapsulation frame-relay
no fair-queue
!
interface Serial0.7 point-to-point
ip address 150.50.67.6 255.255.255.0
frame-relay interface-dlci 167
!
interface Serial0.24 multipoint
ip address 150.50.246.6 255.255.255.224
ip ospf network point-to-multipoint
frame-relay map ip 150.50.246.2 162 broadcast
frame-relay map ip 150.50.246.4 164 broadcast
interface Serial0
no ip address
encapsulation frame-relay
no fair-queue
!
interface Serial0.6 point-to-point
ip address 150.50.246.2 255.255.255.224
ip ospf network point-to-multipoint
frame-relay interface-dlci 126
interface Serial0/0
ip address 150.50.246.4 255.255.255.224
ip broadcast-address 150.50.246.31
encapsulation frame-relay
ip ospf network point-to-multipoint
no fair-queue
clockrate 2000000
frame-relay map ip 150.50.246.6 146 broadcast
interface Serial0
ip address 150.50.67.7 255.255.255.0
no ip directed-broadcast
encapsulation frame-relay
cdp enable
frame-relay map ip 150.50.67.6 176 broadcast
frame-relay lmi-type ansi
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:36 GMT-3