Re: EIGRP Hello and Hold-Time

From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Thu Sep 26 2002 - 01:20:34 GMT-3


David,

the bandwidth setting as far as I know if if you bandwith is more that a T1 speed. 1.544 Mbps, you
would have a eigrp hello at every 5 seconds. In lower bandwidth it's 60 seconds interval.
 I have the same problem with you when I tried this. I run eigrp when the interface is on with
1544kbps bandwidth speed and then later change the speed and the only way to make it work is to shut
and no shut the interface. perhaps other has another way.

Donny

                                                                                                                                       
                      "Voss, David"
                      <dvoss@heidrick.c To: ccielab@groupstudy.com
                      om> cc:
                      Sent by: Subject: EIGRP Hello and Hold-Time
                      nobody@groupstudy
                      .com
                                                                                                                                       
                                                                                                                                       
                      26-09-2002 11:02
                      Please respond to
                      "Voss, David"
                                                                                                                                       
                                                                                                                                       

I am changing EIGRP hello and hold-time timers and quickly note that you
must check the remote router to see if your changes have worked.

I'm testing this in a dial-backup scenario now. On CCO, it states that if
you change the bandwidth setting on a serial interface, it should adjust
EIGRP Hello interval and Hold time. Well, I'm doing that, and it is not
changing. Any suggestions?

CCO

"The bandwidth is adjusted to allow for rapid backup of the link. This
adjusts the EIGRP Hello interval and Hold time for rapid convergence."

Well, not from what I can see.

This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.



This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:04 GMT-3