EIGRP Hello and Hold-Time

From: Voss, David (dvoss@heidrick.com)
Date: Thu Sep 26 2002 - 00:02:49 GMT-3

• Next message: Donny MATEO: "Re: Consensus"
• Previous message: elping: "Re: Consensus"
• Next in thread: Nick Shah: "Re: EIGRP Hello and Hold-Time"
• Maybe reply: Nick Shah: "Re: EIGRP Hello and Hold-Time"
• Maybe reply: Donny MATEO: "Re: EIGRP Hello and Hold-Time"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I am changing EIGRP hello and hold-time timers and quickly note that you
must check the remote router to see if your changes have worked.

I'm testing this in a dial-backup scenario now. On CCO, it states that if
you change the bandwidth setting on a serial interface, it should adjust
EIGRP Hello interval and Hold time. Well, I'm doing that, and it is not
changing. Any suggestions?

CCO

"The bandwidth is adjusted to allow for rapid backup of the link. This
adjusts the EIGRP Hello interval and Hold time for rapid convergence."

Well, not from what I can see.

• Next message: Donny MATEO: "Re: Consensus"
• Previous message: elping: "Re: Consensus"
• Next in thread: Nick Shah: "Re: EIGRP Hello and Hold-Time"
• Maybe reply: Nick Shah: "Re: EIGRP Hello and Hold-Time"
• Maybe reply: Donny MATEO: "Re: EIGRP Hello and Hold-Time"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:04 GMT-3