From: Brian Dennis (brian@5g.net)
Date: Tue Sep 24 2002 - 14:50:30 GMT-3
I think we're on the right page it's just the wording. You meant
"always" if the dead interval command hasn't been used, right?
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: Paglia, John (USPC.PCT.Hopewell) [mailto:JPaglia@NA2.US.ML.com]
Sent: Tuesday, September 24, 2002 10:31 AM
To: 'Brian Dennis'; Paglia, John (USPC.PCT.Hopewell)
Cc: ccielab@groupstudy.com
Subject: RE: Changing the OSPF Dead-Interval
Did you manually change the other intervals as well? Because I'm quite
certain that if you modify ONLY the Hello interval, the dead interval
will
be 4x that value.
John
> -----Original Message-----
> From: Brian Dennis [SMTP:brian@5g.net]
> Sent: Tuesday, September 24, 2002 1:29 PM
> To: 'Paglia, John (USPC.PCT.Hopewell)'
> Cc: ccielab@groupstudy.com
> Subject: RE: Changing the OSPF Dead-Interval
>
> Always?
>
> R2#sho ip os int e0
> Ethernet0 is up, line protocol is up
> Internet Address 10.1.1.2/24, Area 0
> Process ID 1, Router ID 10.1.1.2, Network Type BROADCAST, Cost: 10
> Transmit Delay is 1 sec, State BDR, Priority 1
> Designated Router (ID) 212.12.12.1, Interface address 10.1.1.1
> Backup Designated router (ID) 10.1.1.2, Interface address 10.1.1.2
> Flush timer for old DR LSA due in 00:02:49
> Timer intervals configured, Hello 1, Dead 2, Wait 2, Retransmit 5
> ^^^^^^^^^^^^^^^^
> Hello due in 00:00:00
> Index 1/1, flood queue length 0
> Next 0x0(0)/0x0(0)
> Last flood scan length is 1, maximum is 1
> Last flood scan time is 0 msec, maximum is 0 msec
> Neighbor Count is 1, Adjacent neighbor count is 1
> Adjacent with neighbor 212.12.12.1 (Designated Router)
> Suppress hello for 0 neighbor(s)
> R2#sho ip o n
>
> Neighbor ID Pri State Dead Time Address
> Interface
> 212.12.12.1 1 FULL/DR 00:00:01 10.1.1.1
> Ethernet0
>
>
> Brian Dennis, CCIE #2210 (R&S/ISP Dial)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Paglia, John (USPC.PCT.Hopewell)
> Sent: Tuesday, September 24, 2002 9:23 AM
> To: 'Larson, Chris'; 'Manish Gupta'
> Cc: 'Young Bae'; ccielab@groupstudy.com
> Subject: RE: Changing the OSPF Dead-Interval
>
> The dead timer is ALWAYS 4x the hello interval. if you want dead to be
> 400,
> make the hello 100. It will definately work.
>
> John
>
> > -----Original Message-----
> > From: Larson, Chris [SMTP:CLarson@usaid.gov]
> > Sent: Tuesday, September 24, 2002 12:09 PM
> > To: 'Manish Gupta'; Larson, Chris
> > Cc: 'Young Bae'; ccielab@groupstudy.com
> > Subject: RE: Changing the OSPF Dead-Interval
> >
> > I think if you look at my last post you will see that clearly this
is
> not
> > true. Unless I am totally missing something, it does not matter what
I
> > change the hello interval to, all the other timers follow. If I set
it
> to
> > 32
> > dead timer changes to 128, if I change hello to 25 dead goes to 100
> etc.
> > etc.
> >
> > If I am missing something please explain or show me.
> >
> >
> >
> > > -----Original Message-----
> > > From: Manish Gupta [SMTP:manishgu@cisco.com]
> > > Sent: Monday, September 23, 2002 6:15 PM
> > > To: Larson, Chris
> > > Cc: 'Young Bae'; ccielab@groupstudy.com
> > > Subject: RE: Changing the OSPF Dead-Interval
> > >
> > > Once you manually changes the hello timer, It won't make dead-time
> to 4
> > > times of hello. It happens only for default values.
> > > -Manish
> > >
> > > On Mon, 23 Sep 2002, Larson, Chris wrote:
> > >
> > > > By changing the hello-interval. I think changing the hello will
> > > > automatically change the dead to 4 times the hello
> > > >
> > > > > -----Original Message-----
> > > > > From: Young Bae [SMTP:ybae@cisco.com]
> > > > > Sent: Sunday, September 22, 2002 9:59 PM
> > > > > To: ccielab@groupstudy.com
> > > > > Subject: Changing the OSPF Dead-Interval
> > > > >
> > > > > Hello,
> > > > >
> > > > > I hate asking this type of question to such an advanced
audience
> > like
> > > this
> > > > > one, but can someone tell me how one can change the OSPF
> > Dead-Interval
> > > > > timer without using the "ip ospf dead-interval" command. For
> > example,
> > > if
> > > > > I were to change the interval to twice its default value (for
> both
> > > p-to-p
> > > > > and NBMA type interface), what would I do?
> > > > >
> > > > > Thanks in advance,
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:01 GMT-3