From: Dotun Oni (dot_oni@hotmail.com)
Date: Thu Sep 19 2002 - 14:14:09 GMT-3
The dial-peer tags should be different (can't both be 3) and the lower
preference is preferred.
It should be something like:
dial-peer voice 3 voip
destination pattern 900
session target ipv4:129.9.1.1
preference 0
dial-peer voice 4 voip
destination pattern 900
session target ipv4:129.9.2.2
preference 1
You also need to make sure there is IP connectivity to 129.9.1.1 and
129.9.2.2
D.
>From: Phil <ciscostudent1@yahoo.com.br>
>Reply-To: Phil <ciscostudent1@yahoo.com.br>
>To: "Voss, David" <dvoss@heidrick.com>, "'DBL'"
><dlittlewood@totalise.co.uk>
>CC: ccielab@groupstudy.com
>Subject: RE: Voice Question
>Date: Thu, 19 Sep 2002 11:33:58 -0300 (ART)
>
> David,
>What you need is this:
>dial-peer voice 3 voip
>destination pattern 900
>session target ipv4:129.9.1.1
>preference 1
>dial-peer voice 3 voip
>destination pattern 900
>session target ipv4:129.9.2.2
>preference 0
>You can configure the above without a route to the 129.9.1.1 and 129.9.2.2
>networks but it won't work.
>Felipe
>
> "Voss, David" <dvoss@heidrick.com> escreveu: Thanks, but the reason I
>held off I creating the voip dial-peer was because
>I'm being asked to create this VoIP session to an address that is not in my
>routing table. Something must be wrong in the wording, or I'm simply way
>off base on this.
>
>-----Original Message-----
>From: DBL [mailto:dlittlewood@totalise.co.uk]
>Sent: Thursday, September 19, 2002 8:51 AM
>To: Voss, David
>Cc: ccielab@groupstudy.com
>Subject: Re: Voice Question
>
>
>you need a voip dial peer
>
>example.
>
>dial-peer voice 3 voip
>destination pattern 900
>session target ipv4:129.9.1.1
>
>you need to have ip connectivity to the remote router to make and receive
>calls.
>
>ta.
>
>
>----- Original Message -----
>From: "Voss, David"
>To:
>Sent: Thursday, September 19, 2002 2:34 PM
>Subject: Voice Question
>
>
> > I am creating a voice lab and wish to create a VoIP session in the
>following
> > manner:
> >
> > Create a VoIP session to extension 900 via 129.9.1.1. If this phone is
>not
> > available, the session should then dial 129.9.2.2.
> >
> > Here is what I've done so far:
> >
> > dial-peer voice 1 pots
> > destination pattern 2222
> > port 2/0/0
> >
> > dial-peer voice 2 pots
> > destination pattern 3333
> > port 2/0/1
> >
> > Now, the problem... I don't have 129.9.x.x network in my routing tables,
>so
> > how am I supposed to create a call to these IP addresses? Should I used
>a
> > loopback or local port on my router?
> >
> > Also, not sure how to have a second IP address act as backup to the
>first.
>
>
>---------------------------------
>Yahoo! GeoCities
>Tudo para criar o seu site: ferramentas faceis de usar, espago de sobra e
>acesssrios.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:57 GMT-3