From: Cary Anderson (cary@cisco.com)
Date: Wed Sep 18 2002 - 23:51:16 GMT-3
On your FR Hub under the router ospf heading, do this:
router ospf 1
network 10.1.1.1 0.0.0.0 area 1
network 10.10.1.1 0.0.0.0 area 0
neighbor 10.10.1.2
neighbor 10.10.1.3
neighbor 10.10.1.5
Should fix you right up!
Cary
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CTAlex405c@aol.com
Sent: Wednesday, September 18, 2002 6:57 PM
To: ccielab@groupstudy.com
Subject: Solie Skynet
Configuring the FR your not allowed to use 'ip ospf network' or I would
have done a p2p and p2m. I tried using 2 multipoint interfaces, one
with frame map and one with frame interface-dlci. Not getting
adjacencies, . In the debug getting "OSPF: No full nbrs to build Net
Lsa for interface Serial0.2". Tried putting r1 at ospf priority 10 and
the rest at 0. Can anyone give me a hint.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3