From: Mingzhou Nie (mnie@yahoo.com)
Date: Wed Sep 18 2002 - 18:08:39 GMT-3
and this, if my previous posting isn't clear enough.
http://www.groupstudy.com/archives/ccielab/200206/msg02141.html
--- beda jain <bpjain@cisco.com> wrote:
> Hi,
>
> does Dlsw lite work in frame-relay multipoint interface or not.
>
> Thanks,
> Beda
>
> At 10:17 AM 9/17/2002 -0700, Mingzhou Nie wrote:
> >donny,
> >
> >this question has been asked several times in the past. I'm
> resending
> >my personal notes again.
> >
> >****
> >- encapsulation: watch out direct encap and llc2(dlsw lite) encap.
> both
> >reference individual dlci, but the first one needs "pass-thru"
> option
> >at the end and map dlci to dlsw, vs. the latter one doesn't use
> >"pass-thru" and map dlci to llc2. direct encap only works on main
> >interface. and direct encap doesn't work with backup peer. you can
> not
> >configure ip address in "dlsw local-peer" statement.
> >http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/tech/dls3_rg.htm
>
>http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2007.htm#xtocid31
> >http://www.groupstudy.com/archives/ccielab/200201/msg00583.html
> >http://www.groupstudy.com/archives/ccielab/200111/msg00784.html
> >http://www.groupstudy.com/archives/ccielab/200201/msg00945.html
> >
> >****
> >
> >
> >--- Chris Hugo <chrishugo@yahoo.com> wrote:
> > > Remote Peer stays the same with both.Just the map statements will
> > > differ
> > > frame-relay map LLC2 is "DLSW Lite" --Which has local
> acknowledgment
> > > frame-relay map DLSW is Direct Encapsulation--Which does not have
> > > local acknowledgment
> > > I'm sure others will add to the post. But here is some before I
> sleep
> > > :)
> > > chris hugo
> > > Donny MATEO wrote: Hi Group,
> > >
> > > I need help to clarify what is the difference between these two
> > > configs for DLSW direct
> > > encapsulation :
> > >
> > > dlsw remote-peer 0 frame-relay interface serial 0
> > > int s0
> > > frame-relay map llc2 131
> > >
> > > and
> > >
> > > dlsw remote-peer 0 frame-relay interface serial 0 131
> > > int s0
> > > frame-relay map dlsw 131
> > >
> > > Solie says to use the latter for a multipoint interface. I tried
> the
> > > latter, but the state seems to
> > > stay at disconnect. If I add the statement frame-relay map llc2
> 131,
> > > then it would become connect.
> > >
> > > Any clue ?
> > >
> > > tks.
> > > Donny
> > >
> > >
> > >
> > > This message is for information purposes only and its content
> > > should not be construed as an offer, or solicitation of an offer,
> > > to buy or sell any banking or financial instruments or services
> > > and no representation or warranty is given in respect of its
> > > accuracy, completeness or fairness. The material is subject
> > > to change without notice. You should take your own independent
> > > tax, legal and other professional advice in respect of the
> content
> > > of this message. This message may contain confidential or
> > > legally privileged material and may not be copied, redistributed
> > > or published (in whole or in part) without our prior written
> consent.
> > > This email may have been intercepted, partially destroyed,
> > > arrive late, incomplete or contain viruses and no liability is
> > > accepted by any member of the Credit Agricole Indosuez group
> > > as a result. If you are not the intended recipient of this
> message,
> > > please immediately notify the sender and delete this message
> > > from your computer.
> > >
> > >
> > > ---------------------------------
> > > Do you Yahoo!?
> > > Yahoo! News - Today's headlines
> >
> >
> >__________________________________________________
> >Do you Yahoo!?
> >Yahoo! News - Today's headlines
> >http://news.yahoo.com
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:56 GMT-3