Re: ipx nlsp over serial linterface

From: baganini@attbi.com
Date: Fri Sep 13 2002 - 19:00:16 GMT-3

Hi,
Most of the configuration looks ok but nlsp works on LAN
interfaces with the ipx network statement. With WAN
interface we have to use IPXWAN type of network.

Check this article out
http://www.cisco.com/univercd/cc/td/doc/product/software/
ios121/121cgcr/atipx_c/ipx/2cdipx.htm

Regards 

--
CCIE# 7003
Director of Research & Development
thouma@cyscoexpert.com

CyscoExpert, Inc.
4433 W. Touhy Ave.
LincolnWood, IL 60712
info@cyscoexpert.com
Ph:(847) 674-3392
FX:(847) 674-2625
> I need help with a ipx nlsp over serial link.
> 
> R1-----------------------R2
> 
> in R1:
> ipx routing 0000.0000.0001
> ipx internal-network A1A1
> !
>  
> interface Serial0/1
>  ipx network 1212
>  ipx nlsp enable
>  
>  
> ipx router nlsp
>  area-address 0 0
> 
> In R2:
> ipx routing 0000.0000.0002
> ipx internal-network 2222
> !
> interface Serial0/1
>  ipx network 1212
>  ipx nlsp enable
>  clockrate 64000
> 
> ipx router nlsp
>  area-address 0 0
> 
> Somehow, there is no neighbor relationship built.
> turning on " debug ipx nlsp adj ""
> 
> R1:
> r1#
> 1w0d: NLSP-Adj: Sending L1 IIH on Ethernet0/0
> 
> R2:
> 
> r2#
> 01:25:02: NLSP-Adj: Sending serial IIH on Serial0/1
> r2#
> 01:25:06: NLSP-Adj: Rec serial IIH from *HDLC*
> (Serial0/1), cir type L1, cir id 04
> 01:25:06: NLSP-Adj: old state INIT, new state INIT
> 
> 
> It seems r1 does not get hello packets from r2.
> But r2 does send them.
> 
> 
> Any hint is appreciated
> 
> Guoqi 
> 
> 
> 
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! News - Today's headlines
> http://news.yahoo.com

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:51 GMT-3