From: Guoqi Cui (guoqicui@yahoo.com)
Date: Fri Sep 13 2002 - 18:45:02 GMT-3
I need help with a ipx nlsp over serial link.
R1-----------------------R2
in R1:
ipx routing 0000.0000.0001
ipx internal-network A1A1
!
interface Serial0/1
ipx network 1212
ipx nlsp enable
ipx router nlsp
area-address 0 0
In R2:
ipx routing 0000.0000.0002
ipx internal-network 2222
!
interface Serial0/1
ipx network 1212
ipx nlsp enable
clockrate 64000
ipx router nlsp
area-address 0 0
Somehow, there is no neighbor relationship built.
turning on " debug ipx nlsp adj ""
R1:
r1#
1w0d: NLSP-Adj: Sending L1 IIH on Ethernet0/0
R2:
r2#
01:25:02: NLSP-Adj: Sending serial IIH on Serial0/1
r2#
01:25:06: NLSP-Adj: Rec serial IIH from *HDLC*
(Serial0/1), cir type L1, cir id 04
01:25:06: NLSP-Adj: old state INIT, new state INIT
It seems r1 does not get hello packets from r2.
But r2 does send them.
Any hint is appreciated
Guoqi
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:51 GMT-3