From: Prakash H Somani (pdsccie@rediffmail.com)
Date: Fri Sep 13 2002 - 13:10:35 GMT-3
I had the same openion except...u said "SRT"...why only SRT ?? U
can have SRB also between multiple TrCRF through their Parent
TrBRF isnt it?
regards...Prakash
On Fri, 13 Sep 2002 jeff szeto wrote :
>Hi,
>
>Yes, because you are using 3 different rings. If you use one
>ring, then you
>can use only 1 TrBrf and 3 Trcrf, setting SRT.
>Please correct me if I am wrong.
>
>Jeff
>
>
>
>
>----- Original Message -----
> From: "Prakash H Somani" <pdsccie@rediffmail.com>
>To: "Jeff Szeto" <jytszeto@hotmail.com>
>Cc: <ccielab@groupstudy.com>
>Sent: Friday, September 13, 2002 6:17 PM
>Subject: Re: Re:Help needed on 3920
>
>
> >
> > Hi,
> >
> > But if u configure 3 TrBRF, how would u make these 3 TrBRF
>talk to
> > each other ??? U need external Router or RSM isnt it ?
> >
> > regards....Prakash
> > On Fri, 13 Sep 2002 Jeff Szeto wrote :
> > >Hi,
> > >
> > >I am not good at 3920, but I think it should be 3 TrBrf and
>3
> > >TrCrf. Using
> > >SRB.
> > >
> > >Jeff
> > >
> > >Hi Group,
> > >
> > >I have never worked on 3920...went through the CD
>documentation
> > >for configuration. My Lab date is near and want to know
>weather
> > >my
> > >understanding is correct or not ???
> > >
> > >1. If u want to make 3 Different Rings say 5,6,7 on a 3920,
> > >procedure is as under:
> > >
> > >a. Create TrBRF with say VLAN 100 and assign name to it
>with
> > >Bridge Number. (In Hex)
> > >b. Create TrCRF with with VLAN 5,6 and 7 (In Hex...) and
>assign
> > >proper names.
> > >c. Assign all these TrCRF to parent TrBRF we have created.
> > >d. Choose 3920 ports say 5,6 and 7 and assign it to
>appropriate
> > >TrCRF.
> > >e. Connect 3 Routers to these 3 * 3920 interfaces and all
> > >non-routable traffic between these rings will be bridged by
> > >3920
> > >
> > >Is this understanding correct ?
> > >
> > >Regards....Prakash
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:50 GMT-3