Re: V2- mode on CAt 3550

From: MADMAN (dave@interprise.com)
Date: Fri Sep 13 2002 - 13:02:13 GMT-3

• Next message: baganini@attbi.com: "RE: DLSW netbios filter from beda"
• Previous message: Brian McGahan: "RE: hsrp&dlsw"
• Maybe in reply to: Kohli, Harbir: "V2- mode on CAt 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

  C3550-L3#vlan database
C3550-L3(vlan)#vtp v2
C3550-L3(vlan)#vtp v2-mode
V2 mode enabled.
C3550-L3(vlan)#

  Worked fine. I just upgraded this switch about a half hour ago due to
the field notice of a pretty ugly bug:

http://www.cisco.com/warp/public/770/fn20553.shtml

  Dave

"Kohli, Harbir" wrote:
>
> HI,
>
> Every time I turn on V2-mode on the IOS-based Catalyst I get the following
> error:
> Cat(vlan)#exit
> VLAN 1003 parent VLAN missing
> APPLY failed.
> Exiting....
>
> Anybody know the solution?

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
"You don't make the poor richer by making the rich poorer." --Winston
Churchill

• Next message: baganini@attbi.com: "RE: DLSW netbios filter from beda"
• Previous message: Brian McGahan: "RE: hsrp&dlsw"
• Maybe in reply to: Kohli, Harbir: "V2- mode on CAt 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:50 GMT-3