From: Jayashanker Warrier (jwarrier@rediffmail.com)
Date: Thu Sep 12 2002 - 04:05:50 GMT-3
I would say dialer-watch will be the option in your case.
Thanks
Jayashanker
On Wed, 11 Sep 2002 BIGB97750@aol.com wrote :
>Greetings,
>
>I am working from Solie''s book on ISDN chap 16 ppp authen,
>callback,
>multilink.
>The lab call for both routers using the ISDN as a backup for the
>point to
>point serial using subinterfaces over frame. They also ask for
>both ends to
>call one another. My question is this when you use the backup
>interface
>command it puts the bri interface in standby. If you unplug
>either end of the
>frame circuit, the ISDN will start to dial. However, they never
>connect
>because the remote bri interface stays in standby. If you
>disconnect the
>frame connection for the standby interface then it works. How can
>I get the
>remote interface to recognize when local interface is down
>
>Big
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:49 GMT-3