From: Raj Bahad (raj.bahad@totalise.co.uk)
Date: Wed Sep 11 2002 - 20:53:05 GMT-3
Hey Group,
I've taken the following "sh snapshot" output from the snapshot server and
client. Does anyone know why the "BRI0 is up, line protocol is upSnapshot
server line state down" is in a down state on the server even though the
link is active.
I can fix this by adding a "dialer" statement to the "snapshot server 5"
command, but was really wanting to know the reason for the above mentioned
output.
Any help will as always be greatly appreciated!
Thanks,
Raj.
SERVER:
R7#
interface BRI0
ip address 172.16.27.2 255.255.255.252
encapsulation ppp
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 batman
no ip mroute-cache
dialer map ip 172.16.27.1 name R2 broadcast 5551000
dialer map ipx 27.0000.0000.2222 name R2 broadcast 5551000
dialer load-threshold 127 either
dialer-group 1
ipx network 27
isdn switch-type basic-ni
isdn spid1 75755520000101 5552000
isdn spid2 75755520010101 5552001
snapshot server 5
no peer neighbor-route
compress predictor
ppp quality 70
ppp multilink
!
R7#sh snapshot
BRI0 is up, line protocol is upSnapshot server line state down
Length of active period: 5 minutes
For ipx address: 27.0000.0000.2222
Current state: active, remaining time: 5 minutes
CLIENT:
R2#
interface BRI0
ip address 172.16.27.1 255.255.255.252
encapsulation ppp
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 batman
ip ospf cost 9999
ip ospf demand-circuit
no ip mroute-cache
dialer map snapshot 1 name R7 broadcast 5552000
dialer map ipx 27.0000.0000.7777 name R7 broadcast 5552000
dialer map ip 172.16.27.2 name R7 broadcast 5552000
dialer load-threshold 127 either
dialer-group 1
ipx network 27
isdn switch-type basic-ni
isdn spid1 75755510000101 5551000
isdn spid2 75755510010101 5551001
snapshot client 5 8 dialer
no peer neighbor-route
compress predictor
ppp quality 70
ppp multilink
!
R2#sh snapshot
BRI0 is up, line protocol is upSnapshot client
Options: dialer support
Length of active period: 5 minutes
Length of quiet period: 8 minutes
Length of retry period: 8 minutes
For dialer address 1
Current state: active, remaining/exchange time: 5/0 minutes
Connected dialer interfaces:
BRI0:1, Virtual-Access1
!
R2#sh dialer
BRI0 - dialer type = ISDN
Dial String Successes Failures Last DNIS Last status
5552000 0 1 00:00:33 successful
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI0:1 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is multilink member
Dial reason: snapshot
Connected to 5552000 (R7)
BRI0:2 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is idle
R2#
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:49 GMT-3