From: Colin Barber (Colin.Barber@telewest.co.uk)
Date: Mon Sep 09 2002 - 05:08:43 GMT-3
I would say you are correct, and yes I have seen a lot of conflicting
configs.
Colin
-----Original Message-----
From: Cade Wagner [mailto:cwagner@logosinc.com]
Sent: 09 September 2002 05:15
To: 'ccielab@groupstudy.com'
Subject: HELP: Multiring All and DLSW
I have a quick question. Under normal circumstances with DLSW (bridging
NETBIOS and SNA), is it necessary to use the "multiring all" command?
(Assume that the token ring interface is connected to a 3920 with the mode
set to SRB) I was under the impression that "multiring all" command was for
adding a rif to layer-3 communications, and if that is the case it shouldn't
be needed for bridging SNA and NETBIOS, but is needed to allow layer-3
communications across a SRB network. Is this correct? The configs that I
have seen are conflicting. Please comment. Thanks in advance.
Cade
------------------------------------------------------------------------------
Live Life in Broadband
www.telewest.co.uk
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.
Statements and opinions expressed in this e-mail may not represent those of the company. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
==============================================================================
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:47 GMT-3