From: Pieter Jordaan (pieterj@is.co.za)
Date: Mon Sep 09 2002 - 03:40:23 GMT-3
Hi
I was doing a lab this weekend where one of the requirements was to
configure 2 routers to establish a connection through the ATM link. The
requirement however is for you to determine what the vpi/vci values are as
they don't provide it and you don't have access to the ATM switch.
Has anyone come across this. I have checked the cisco doc CD and website but
couldn't find anything useful. I have also tried all the debug atm xxx
commands that I could find.
All help appreciated.
Regards Pieter
"This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates ("the
sending company ") any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business or
client engagement letter . The sending company does not accept liability for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail."
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:47 GMT-3