From: Brian Dennis (brian@5g.net)
Date: Sun Sep 08 2002 - 17:48:37 GMT-3
You need to enable "ip gdp irdp" in the global config.
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Volkov, Dmitry (Toronto - BCE)
Sent: Sunday, September 08, 2002 1:07 PM
To: 'ccielab@groupstudy.com'
Subject: How to test IRDP ?
Hello,
I'm confused how to test IRDP using router as host. I setup 3 router on
ethernet segment:
R1:
int e0/0
ip add 170.240.8.1/24
ip irdp
ip irdp preference 200
R2:
int e0
ip add 170.240.8.2/24
ip irdp
ip irdp preference 100
R3:
no ip routing
int e0
ip add 170.240.8.9/24
ip irdp
after deb ip icmp enabled, I see on R3
2d22h: ICMP: rdp advert rcvd type 9, code 0, from 170.240.8.1
r9#
2d22h: ICMP: rdp advert rcvd type 9, code 0, from 170.240.8.2
I don't see any routes on R3:
r3#ro
Default gateway is not set
Host Gateway Last Use Total Uses Interface
ICMP redirect cache is empty
r3#
Thank You,
Dmitry
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:46 GMT-3