From: Volkov, Dmitry (Toronto - BCE) (dmitry_volkov@ca.ml.com)
Date: Tue Sep 03 2002 - 17:47:17 GMT-3
Chris,
Maybe I'm wrong but I guess that assigning static cam entry to cat port
will not prevent the other devices to use that port.
Dmitry
> -----Original Message-----
> From: Chris Hugo [mailto:chrishugo@yahoo.com]
> Sent: Tuesday, September 03, 2002 4:25 PM
> To: ted.mcdermott@exeloncorp.com; cwagner@logosinc.com;
> ccielab@groupstudy.com
> Subject: RE: set cam / span
>
>
> Maybe this is a good way to lock down that specific
> switchport to the mac address you specified with the static
> cam entry. That way no other computers can use that port.
> Because this port should only be used only for the sniffer.
> I'm throwing this in the air guys.
> chris hugo
> ted.mcdermott@exeloncorp.com wrote: Cade,
>
> The only thing that I can think of is that using CAM you might be
> able to lock down traffic such that it doesn't impact
> anything except the
> source and destination stations. It would be a good solution
> to a layer-two
> only switch where a lot of traffic came in the source port,
> and you wanted
> to avoid it from impacting the other stations on the switch.
> Perhaps, a
> heavy-duty multicast or broadcast could be contained that
> way. Anyone know
> how to do this?
>
> Ted
>
> -----Original Message-----
> From: Cade Wagner [mailto:cwagner@logosinc.com]
> Sent: Tuesday, September 03, 2002 1:20 PM
> To: 'ccielab@groupstudy.com'
> Subject: FW: set cam / span
>
>
> The question of using CAM and SPAN together was posed some time ago,
> and I don't think that there was a good answer at the time.
> Does anyone
> have a good answer now? Just can't seem to understand why you should
> statically set CAM Macs when using SPAN as some have
> recommended. Thanks in
> advance.
>
> Cade
>
> -----Original Message-----
> From: avantus1@hotmail.com [mailto:avantus1@hotmail.com]
> Sent: Wednesday, January 23, 2002 10:02 PM
> To: ccielab@groupstudy.com
> Subject: set cam / span
>
> Hi, all
>
> Could anyone explain the reason why I should set cam permanent when
> configuring span?
>
> any help would be appreciated.
>
> thanks in advance
>
> BS Kang.
>
>
>
> _________________________________________________________________
> http://photos.msn.co.kr ?!<- MSN FwEd8& ;g?kGO8i ?B6s@N
> ;s?!<- ;gAx@; @N0m 4Y8% ;g6w5i0z 0x@/GR
> _________________________________________________________________
> CCIE Security list: http://www.groupstudy.com/list/security.html
> **************************************************************
> **********
> This e-mail and any of its attachments may contain Exelon Corporation
> proprietary information, which is privileged, confidential,
> or subject
> to copyright belonging to the Exelon Corporation family of Companies.
> This e-mail is intended solely for the use of the individual
> or entity
> to which it is addressed. If you are not the intended
> recipient of this
> e-mail, you are hereby notified that any dissemination, distribution,
> copying, or action taken in relation to the contents of and
> attachments
> to this e-mail is strictly prohibited and may be unlawful. If
> you have
> received this e-mail in error, please notify the sender
> immediately and
> permanently delete the original and any copy of this e-mail and any
> printout. Thank You.
> **************************************************************
> **********
> ---------------------------------
> Do You Yahoo!?
> Yahoo! Finance - Get real-time stock quotes
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:42 GMT-3