From: Brian Dennis (brian@5g.net)
Date: Tue Sep 03 2002 - 11:23:35 GMT-3
What did you set the line delay to? Try using a very high line delay
(i.e. 1500ms or 2000ms).
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
sholy augustine
Sent: Tuesday, September 03, 2002 6:46 AM
To: Donny MATEO; ccielab@groupstudy.com
Subject: RE: Ping Script? re-phrase
Hi,
I tried by changing the character speed and line speed
in Hyperminal. But when I paste the ping commands,
only the first command is being exeuted. Do I have to
configure anything else
Regards,
Sholy Augustine
--- Donny MATEO <donny.mateo@sg.ca-indosuez.com>
wrote:
> hmm..
>
> term rxspeed ?
> term telnet speed ?
> care to elaborate how to change delay to 1 msec and
> line delay between 500-750 msec on the various
> software used at CCIE lab ?
>
> thx
> Donny
>
>
>
>
>
> Phil
>
>
> <ciscostudent1@ya To:
> William Wong Kun Sing
> <wong_kunsing@solsis-eso.com.my>, "'Groupstudy'"
>
> hoo.com.br>
> <ccielab@groupstudy.com>
>
> Sent by: cc:
>
>
> nobody@groupstudy
> Subject: RE: Ping Script? re-phrase
>
> .com
>
>
>
>
>
>
>
>
> 03-09-2002 05:47
>
>
> Please respond to
>
>
> Phil
>
>
>
>
>
>
>
>
>
>
>
>
> William,
> To make it work you have to change the character
> delay to 1 msec and the line delay between 500 and
> 750 msec in the terminal emulator software.
> Phil
>
> William Wong Kun Sing
> <wong_kunsing@solsis-eso.com.my> escreveu: Guys,
>
> Sorry, what i mean is after i have finished my lab
> and want to test the
> routing info for all the routers. Like for example
> use the notepad to have
> multiple ping command as the below:
>
> ping 1.1.1.1
> ping 1.1.2.1
> ping 1.1.3.1
>
> and copy & paste on the routers. I have tried that
> but it will only ping
> the first address and then stop. I need a ping
> script which can ping all
> the interfaces to save some expensive time.
>
> Thanks.
>
> Best regards,
>
> William
>
>
> -----Original Message-----
> From: Dimitris Vassilopoulos
> [mailto:Dimitris.Vassilopoulos@eurodyn.com]
> Sent: Tuesday, September 03, 2002 2:05 PM
> To: William Wong Kun Sing
> Cc: 'Groupstudy'
> Subject: Re: Ping Script?
>
>
> Try the extended ping, with the repeat count set to
> more than the
> default:
>
> Router#ping
> Protocol [ip]:
> Target IP address: x.x.x.x
> Repeat count [5]: 100
> Datagram size [100]:
> Timeout in seconds [2]:
> Extended commands [n]:
> Sweep range of sizes [n]:
> Type escape sequence to abort.
> Sending 100, 100-byte ICMP Echos to x.x.x.x, timeout
> is 2 seconds:
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> Success rate is 100 percent (100/100), round-trip
> min/avg/max = 1/2/4 ms
>
> Router#
>
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:42 GMT-3