From: Fred Ingham (fingham@cox.net)
Date: Mon Sep 02 2002 - 15:32:14 GMT-3
Sovan:
1) two TrBRFs, one for each of the two TrCRFs
2) Same or different, TrBRF Br number is not used .
TrCRF ring number is the local ring number in the
sou lrn br trn command on the To interfaces.
HTH, Fred
----- Original Message -----
From: "sovan parida" <sovanp@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, September 01, 2002 9:22 AM
Subject: 3920 TRBRF bridge no Vs DLSW bridge no.
> Hi Group,
> Can anyone please clarify the following regarding the
> above mentioned subject. I have two routers with one
> token ring each, connected over serial links. I need
> to establish DLSW connectivity between the two token
> rings. My questions are as follows...
>
> 1. How many TRBRFs do I need to define for the two
> TRCRFs(for the two rings) in my 3920 switch config. Is
> it one or two ?
>
> 2. DO the bridge no(s) for the TRBRFs need to be
> different or same with the bridge nos in the
> 'source-bridge ring-number bridge-no target-ring-no'
> command.
>
> TR---RTA-------Serial link------RTB---TR
>
> Thanks and regards....Sovan
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Finance - Get real-time stock quotes
> http://finance.yahoo.com
> _________________________________________________________________
> Commercial lab list: http://www.groupstudy.com/list/commercial.html
> Please discuss commercial lab solutions on this list.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:41 GMT-3