3920 TRBRF bridge no Vs DLSW bridge no.

From: sovan parida (sovanp@yahoo.com)
Date: Sun Sep 01 2002 - 10:22:02 GMT-3

• Next message: Peter van Oene: "Re: OSPF : Distribute-list in for LSA filtering"
• Previous message: pego peg: "frame-relay broadcast"
• Next in thread: Fred Ingham: "Re: 3920 TRBRF bridge no Vs DLSW bridge no."
• Maybe reply: Fred Ingham: "Re: 3920 TRBRF bridge no Vs DLSW bridge no."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,
Can anyone please clarify the following regarding the
above mentioned subject. I have two routers with one
token ring each, connected over serial links. I need
to establish DLSW connectivity between the two token
rings. My questions are as follows...

1. How many TRBRFs do I need to define for the two
TRCRFs(for the two rings) in my 3920 switch config. Is
it one or two ?

2. DO the bridge no(s) for the TRBRFs need to be
different or same with the bridge nos in the
'source-bridge ring-number bridge-no target-ring-no'
command.

TR---RTA-------Serial link------RTB---TR

Thanks and regards....Sovan

• Next message: Peter van Oene: "Re: OSPF : Distribute-list in for LSA filtering"
• Previous message: pego peg: "frame-relay broadcast"
• Next in thread: Fred Ingham: "Re: 3920 TRBRF bridge no Vs DLSW bridge no."
• Maybe reply: Fred Ingham: "Re: 3920 TRBRF bridge no Vs DLSW bridge no."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:40 GMT-3