From: jin (jin10101010@xxxxxxxxxxx)
Date: Sat Aug 31 2002 - 19:05:56 GMT-3
Thanks.
It's Ok...
Thanks again.
----- Original Message -----
From: "Frank" <frank@buff-net.com>
To: "'jin'" <jin10101010@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, September 01, 2002 6:47 AM
Subject: RE: dlsw...
> Jin,
>
> LLC2 provides local acknowledgment, but when you use the
> pass-thru keyword you're saying don't use local acknowledgment. When
> you use pass-thru you must map into "dlsw" vice LLC2. This is DIRECT
> encapsulation.
>
> Leave off the pass-thru and you have LLC2 or DLSw Lite
> encapsulation. Then you must map to LLC2 as you have below.
>
> Unless you're on a sub-interface then of course use the
> 'frame-relay interface-dlci N' command.
>
> HTH...aloha, Frank
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> jin
> Sent: Saturday, August 31, 2002 11:12 AM
> To: ccielab@groupstudy.com
> Subject: dlsw...
>
> I'm testing fr map.
> But dlsw peer is 'disconnect' state still.
> I configured it as the cisco guide.
> First, dlsw remote 0 frame inter s 0 16 pass-th
> and then, in the inface config mode make 'fr map llc2 dlci'
> But now it is disconnct state..
>
> Do I have a problem that I don't know still?
>
> Thanks.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:43 GMT-3