From: Frank (frank@xxxxxxxxxxxx)
Date: Sat Aug 31 2002 - 18:47:09 GMT-3
Jin,
LLC2 provides local acknowledgment, but when you use the
pass-thru keyword you're saying don't use local acknowledgment. When
you use pass-thru you must map into "dlsw" vice LLC2. This is DIRECT
encapsulation.
Leave off the pass-thru and you have LLC2 or DLSw Lite
encapsulation. Then you must map to LLC2 as you have below.
Unless you're on a sub-interface then of course use the
'frame-relay interface-dlci N' command.
HTH...aloha, Frank
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jin
Sent: Saturday, August 31, 2002 11:12 AM
To: ccielab@groupstudy.com
Subject: dlsw...
I'm testing fr map.
But dlsw peer is 'disconnect' state still.
I configured it as the cisco guide.
First, dlsw remote 0 frame inter s 0 16 pass-th
and then, in the inface config mode make 'fr map llc2 dlci'
But now it is disconnct state..
Do I have a problem that I don't know still?
Thanks.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:43 GMT-3