From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Wed Aug 28 2002 - 05:42:38 GMT-3
use a dummy number on both the ends (in dialer map), it should work. You are
pretty close to getting it to work.
Nick
----- Original Message -----
From: kpalmer <kip.palmer@verizon.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, August 28, 2002 5:56 PM
Subject: ENCAP FAILS PPP/DDR/AUX
> Homies-
>
> I'm dying over here! I've got to get the successful aux-to-aux, one-way
> call, ISDN sim to work.
>
> Please don't send me to another,"Almost what I'm looking for, but not
> bright
> enough to figure out", CCO link. :]
>
> A working config would be STELLAR!
>
> Here's my current config that looks good but encap fails so no routing
> info is exchanged.
>
> Help....
>
> KPalmer
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> r6-calling----------called-r8
> ===============================
>
> ===r8--called router*
>
> username r6 password 0 cisco
>
> chat-script virtualmodem " "
>
> interface Async1
> bandwidth 128
> ip address 139.7.191.8 255.255.255.0
> encapsulation ppp
> dialer in-band
> dialer idle-timeout 300
> dialer map ip 139.7.191.6 name r6 broadcast
> dialer-group 1
> async default routing
> async dynamic routing
> async mode dedicated
> ppp authentication chap
> ppp chap password cisco
>
> router igrp 10
> network 139.7.0.0
>
>
> line aux 0
> exec-timeout 0 0
> script dialer virtualmodem
> modem Dialin
> transport input all
> flowcontrol hardware
>
> ===
> 2d04h: IP: s=139.7.191.6 (local), d=139.7.191.8 (Async1), len 74,
> encapsulation
> failed, proto=9
> ====
>
> =====r6--calling router*
>
> username r8 password 0 cisco
>
> chat-script virtualmodem " "
>
> interface Async1
> bandwidth 128
> ip address 139.7.191.6 255.255.255.0
> encapsulation ppp
> dialer in-band
> dialer idle-timeout 300
> dialer map ip 139.7.191.8 name r8 broadcast
> dialer-group 1
> async default routing
> async dynamic routing
> async mode dedicated
> ppp authentication chap
> ppp chap password cisco
>
> router igrp 10
> network 139.7.0.0
>
> line aux 0
> exec-timeout 0 0
> script dialer virtualmodem
> modem Host
> transport input all
> flowcontrol hardware
>
>
> ============================
>
> 6#>debug dialer
>
> 2d03h: Async1 DDR: Dialing cause ip (s=139.7.191.6, d=255.255.255.255)
> 2d03h: IP: s=139.7.191.6 (local), d=255.255.255.255 (Async1), len 60,
> encapsulation failed
>
> ===========================
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:40 GMT-3