From: Desimone, Aurelio (ADesimone@xxxxxxxxx)
Date: Tue Aug 27 2002 - 09:29:08 GMT-3
Correct; the 'backup load' command is used to bring up the isdn line at a
certain percentage of mail line load.
Aurelio
-----Original Message-----
From: Bill Mckenzie [mailto:bmckenzie@hotmail.com]
Sent: Tuesday, August 27, 2002 6:08 AM
To: ccielab@groupstudy.com
Subject: argument over dialer load-threshold command
am I correct that the dialer load-threshold command under the dialer
interface is only used for instructing at which percentage of the load that
the ISDN line brings up another B channel and not at what percentage of the
main line load that it will bring up the ISDN interface? Here is a bit of
the config
interface Dialer1
description ISDN Backup circuit to
ip address 10.5.216.74 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name
dialer string
dialer load-threshold 192 either
dialer-group 1
Thanks,
Bill Mckenzie
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:39 GMT-3