argument over dialer load-threshold command

From: Bill Mckenzie (bmckenzie@xxxxxxxxxxx)
Date: Tue Aug 27 2002 - 08:08:22 GMT-3


   
am I correct that the dialer load-threshold command under the dialer
interface is only used for instructing at which percentage of the load that
the ISDN line brings up another B channel and not at what percentage of the
main line load that it will bring up the ISDN interface? Here is a bit of
the config

interface Dialer1
description ISDN Backup circuit to
ip address 10.5.216.74 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name
dialer string
dialer load-threshold 192 either
dialer-group 1

Thanks,
Bill Mckenzie



This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:39 GMT-3