From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Mon Aug 26 2002 - 20:05:12 GMT-3
Thanks.
--- Jason Sinclair <sinclairj@powertel.com.au> wrote:
> Peng,
>
> The CCO CCIE site mentions that CLNS is no longer
> tested on the R&S lab,
> hence there is no need to configure clns router isis
> as this is only
> required for OSI routing. You should just use ip
> router isis for routing IP
> via the ISIS protocol.
>
> Regards,
>
> Jason Sinclair CCIE #9100
> Manager, Network Control Centre
> POWERTEL
> 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> email: sinclairj@powertel.com.au
>
> -----Original Message-----
> From: Peng Zheng [mailto:zpnist@yahoo.com]
> Sent: Tuesday, 27 August 2002 08:04
> To: ccielab@groupstudy.com
> Subject: ISIS configuration
>
> In Cisco Interactive Mentor, they said
> clns router isis should be configured under the
> interface for integrated IS-IS. But I saw a lot of
> examples only use ip router isis.
>
> Which one I should take if I'm asked to configure
> ISIS?
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:38 GMT-3