RE: set ip next-hop

From: Jim Brown (Jim.Brown@xxxxxxxxxxxxx)
Date: Sun Aug 25 2002 - 16:01:16 GMT-3

   
I think Michael is referring to the difference between a routed protocol and
a routing protocol.

You can set the next hop of a routed protocol, IP is a routed protocol,
while RIP is a routing protocol.

-----Original Message-----
From: ccie candidate [mailto:ccie1@lycos.com]
Sent: Sunday, August 25, 2002 12:52 PM
To: 'ccie candidate'; msnyder@revolutioncomputer.com
Cc: ccielab@groupstudy.com
Subject: RE: set ip next-hop

so what you mean by traffic and not route manipulation ?
can you give an example for clarification ? 

--

On Sun, 25 Aug 2002 13:46:04
 Michael Snyder wrote:
>I could be wrong, but I believe it's just used for traffic, not route
>manipulation.  It would be nice if you could!
>
>On the other hand, one of the cool things you can do is set multiple
>next hops for packets.  If the first next hop you set is missing, it
>will use the second, etc.
>
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>ccie candidate
>Sent: Sunday, August 25, 2002 1:12 PM
>To: ccielab@groupstudy.com
>Subject: set ip next-hop
>
>folks ;
>
>i wonder if someone explain what is the function of set ip next-hop used
>in route maps , what is it mean ?
>
>assume i have a router where im redistributing two protocols (eigrp/ospf
>) for example where i used route map to select certain networks from the
>eigrp domain to be redistributed into the ospf domain .
>what will happen if i set the ip next hop of those routes also to
>another ip address ?? will they propagate inside the ospf domain carring
>this new next hop ..or what will happen ??
>
>
>thx
>
>
>
>

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:37 GMT-3