From: Joseph Rinehart (jjrinehart@xxxxxxxxxxx)
Date: Sat Aug 24 2002 - 20:35:30 GMT-3
Hi All. Weird problem I can't seem to figure out.
I am trying to set up a Lab scenario (specifically Lab 51 in the Cisco CCIE
Lab Study Guide by Hutnik and Satterlee) and keep running into a problem. The
way my lab is cabled (I work on it remotely) I am missing an extra serial
interface needed for a BGP Confederations exercise. I figured it would be
easy to just substitute a GRE Tunnel interface for the serial line (I have
been able to do this for IGP setups with ease). I am using a /30 just as you
would any serial link but when I try to configure the neighbor statement I get
the error "cannot configure local system as neighbor." I have checked teh
addressing and tried to use the tunnel though both Ethernet and Serial
interfaces with the same result.
Any insight on this?
Joe
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:36 GMT-3