From: ccie@xxxxxxxxxxxx
Date: Thu Aug 22 2002 - 16:10:41 GMT-3
My understanding of the scenario is that they want to permit an address range
and deny the rest.
BTW, the IPX network range to allow is B8000-B80FF
Would the following command serve the purpose?
access-list 801 permit any B8000.0000.0000.0000 B80ff.ffff.ffff.ffff
Quoting ccie candidate <ccie1@lycos.com>:
> source and destion will be used only for the traffic , not for the routes
> propagated via routing protocols , you can select the routes by the source
> part of the ACL
>
> is this an address range which you want to permit and deny the rest ??
>
>
>
>
> --
>
> On Wed, 21 Aug 2002 23:39:35
> ccie wrote:
> >Router (config)# access-list 800 permit b8022 a8022
> >The above IPX access list allows only traffic from network b8022 destined
> for
> >network a8022 to be forwarded.
> >
> >How do you write the IPX access list when the scenario asks:
> >allow only network number IPX B8022-B80FF,
> >with no mention of the source or destination?
> >
> >Thanks.
-_-_-_ Free Email Service! No Hidden Charges! Click Below to Sign Up -_-_-
This mail sent through http://mail3000.com/register.html
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:34 GMT-3