From: J. Tsao (johnnyt@xxxxxxxxxx)
Date: Wed Aug 21 2002 - 14:34:42 GMT-3
thanks to all!
Johnny
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ashok.Gupta
Sent: Wednesday, August 21, 2002 12:49 AM
To: 'Johnny Tsao'; 'R&S'
Subject: RE: virtual-tokenring interface...
Hi,
I had similar problem, you will find that you are not able to assign IP
addresses to virtual token ring in OS 12.1, if you try os 12.0(16) or lower
should be ok
Ashok
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Johnny Tsao
Sent: 21 August 2002 04:59
To: R&S
Subject: virtual-tokenring interface...
Router4(config)#int virtual-TokenRing 0
Router4(config-if)#ip add
Router4(config-if)#ip address 192.168.1.1 255.255.255.0
% IP addresses may not be configured on a Virtual-TokenRing interface.
Router4(config-if)#
do you have to specify a global command or something else? I'm running
IOS 12.1. However, ipx network command works. go figure.
Johnny Tsao, CCIE 8759
Network Catalyst, Inc.
Network Operations Center
www.netcat.com
netcat_noc@netcat.com
877-638-2287 Opt. 1
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:32 GMT-3