From: ccie candidate (ccie1@xxxxxxxxx)
Date: Tue Aug 20 2002 - 09:03:07 GMT-3
opss sorry i read both of the nets as 168 :))
if the rip is ver1 then
what will happen is that r2 will advertise only 168.1.0.0 to R3 , two major cla
ss networks is there .
if the rip is ver2 , then both /29 and /24 will be advertised ...a filter in th
e redistribute command can get rid of the unwanted subnet
or distribute list out the rip interface as well.
HTH
--On Tue, 20 Aug 2002 12:11:14 Raj wrote: >How about this: > >area x range 168.1.10.0 255.255.255.0 > >If anyone disagrees, let me know! > >Raj. > >-----Original Message----- >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of >William Wong Kun Sing >Sent: 20 August 2002 11:58 >To: 'Groupstudy' >Subject: ACL to block /29 route? > > >Hi guys > > >I have these 2 ospf routes in r2 being redistributed into rip in r2: > >168.1.10.0/29 >168.1.10.0/24 > > > ---------OSPF--------r2------------RIP----------------r3 > 168.1.10.0/29 166.1.10.0/24 > > >I just want to advertise the /24 network to r3. How can I achieve that? > >Thanks in advance. > > >Best regards, > > >William
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:30 GMT-3