From: Ted Richmond (rich_ted@xxxxxxxxx)
Date: Fri Aug 16 2002 - 05:03:07 GMT-3
Hi group,
Just now, I finished reading Qos config guide. It is a
good doc, but it still didt'n answer all the issues.
Here are some of the issues that are not clearly
addressed in the cnfig guide:
1) Can we apply 'ip rtp priority' on a frame-relay
interface? If yes, what is preferred on a frameR intf?
- ip rtp priority or frame-relay ip rtp priority?
2) If we are requiredl to allocate 50% b/w to a
traffic during congestion, what method should we
follow - CBWFQ/ custom-queuing?
3) Do we have to worry about random-detect dspu....
for the CCIE lab exam?
4) Is DTS (distributed traffic shaping) part of the
test?
5) Is FRTS only for frame-relay SVCs? There is a note
in Qc-157- "FRTS is not effective for Layer 2 PVC
switching using the frame-relay route command"
Thanks in advance.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:27 GMT-3