From: ccie candidate (ccie1@xxxxxxxxx)
Date: Fri Aug 16 2002 - 02:49:31 GMT-3
hi ;
these scenario will not work in briding as well as some other things i come to
discover .
ipx rip ---> you cannot disable split horizon , you need subif.
Nlsp------> also you need subif (duno why )
briding --> packets will not return back from the same interface .
pim dense mode --> the prune will not be listened by spokes and cannot be overr
ide ...use sparse mode .
HTH
--On Fri, 16 Aug 2002 08:31:49 Ng, Kim Seng David (David) wrote: >Hi group, > > I am having some difficulties with the following bridging scenario: > > > e0-R2-s0------------FR CLOUD---------s0-R3-BVI1 > | > | > | > e0-R1 (HUB) > > >R1 is the Root Bridge and the hub in this frame-relay hub and spoke configurat ion. All has bridging switched on. Since they are all using physical interface, I need to configure "frame-relay map bridge [dlci] broadcast" on every router. The R1 will have two frame-map bridge mappings as it is the hub. I also enable d IRB and created a BVI1 on R3. The command "bridge 1 route ip" is configured o nly on R3 since the BVI is there. > >Tested by pinging the BVI1 on R3 from a PC connected to the e0 of R1 and R2. T he result: > >From R1 -PASSED >From R2 -FAILED (even after "clear arp") > >Has this got something to do with split-horizon? > >Thanks in advance >David
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:27 GMT-3