From: atechi4life (atechi4life@xxxxxxxxx)
Date: Fri Aug 16 2002 - 01:40:55 GMT-3
Hi guys,
I tried changing the config regiser to 0x2101 then trying to load the ios
but it still fails. I have pasted the error I get below. Your help is
appreciated. Thanks
Router(boot)#copy tftp flash
System flash directory:
No files in System flash
[0 bytes used, 16777216 available, 16777216 total]
Address or name of remote host [192.1.1.1]?
Source file name? c2500-jos56i-l.121-4.bin
Destination file name [c2500-jos56i-l.121-4.bin]?
Accessing file 'c2500-jos56i-l.121-4.bin' on 192.1.1.1...
Loading c2500-jos56i-l.121-4.bin from 192.1.1.1 (via Serial0): ! [OK]
Device needs erasure before copying new file
Erase flash device before writing? [confirm]
Copy 'c2500-jos56i-l.121-4.bin' from server
as 'c2500-jos56i-l.121-4.bin' into Flash WITH erase? [yes/no]yes
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...NOT erased
Copy aborted - erase failed
ERR: 'c2500-jos56i-l.121-4.bin' open - device needs erasure
Router(boot)#
-----Original Message-----
From: atechi4life [mailto:atechi4life@yahoo.com]
Sent: Thursday, August 15, 2002 1:14 AM
To: ccielab@groupstudy.com
Subject: Upgrade Error
Hi,
I am trying to upgrade the ios on my router but I am unable to do it. It
would start the process and abort after it confirms if I want to erase the
ios before loading the new ios. I would get an abort error. Has anyone
experience this problem before? The switch is a 2520. I upgrade the boot
roms so I don't think that's the problem. Any suggestions?
Trevor
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:27 GMT-3