From: Hunt Lee (huntl@xxxxxxxxxxxxxxxxx)
Date: Wed Aug 14 2002 - 21:23:26 GMT-3
Pete,
Thanks so much for your reply. The e.g. is at the near end of that link
(under the heading "Calculating the Shortest Path").
Thanks again for your help.
Best Regards,
Hunt Lee
-----Original Message-----
From: Peter van Oene [mailto:pvo@usermail.com]
Sent: Thursday, 15 August 2002 5:29 AM
To: ccielab@groupstudy.com
Subject: Re: OSPF stub network
I don't see the example you are referring to, but a stub network is an
interface upon which there is no adjacency established. Interfaces are
listed one by one in each router's type 1 LSA along with the type being
transit or stub. For details like this, you should really consult the RFC.
Pete
At 05:37 PM 8/14/2002 +1000, Hunt Lee wrote:
>Hi All,
>
>Reading OSPF this afternoon, there is a paragraph on CCO as follows:-
>
>http://www.cisco.com/warp/public/104/ospfdb7.html
>
>"If they're on a common subnet, the routers install routes for any
>stub networks listed in their neighbor's router LSA. In our example,
>6.0.0.0/8 is the only stub network listed in Router 3.3.3.3's LSA in
>Area 1, to which Router 2.2.2.2 is already directly connected."
>
>What qualifies as a Stub Network??? What does it mean by "any stub
>networks listed in their neighbor's Router LSA"? I would have thought
>the 5.0.0.0/8 would be included also?
>
>Am I clearly missing something?
>
>Cheers
>
>http://digital.yahoo.com.au - Yahoo! Digital How To
>- Get the best out of your PC!
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:25 GMT-3